好多年没折腾这机器了，有幸拿到一个国外仓库里面的全新货，刚好手上有个12T的硬盘，遂拆机安装。
其实本来不用测试安装，因为Linux系统，支持12T硬盘是天经地义的。
刷机教程（俄罗斯）：
Howto replace or restore original firmware:
* You can use any of *nix system. I use Debian (Ubuntu similar).
* All command runing from root user. Or use Sudo.
* First thing after boot in liveCD - install software: apt-get update && apt-get install mdadm parted
!! For install new HDD - go from p.1. If you repare exist HDD - go to p.8-2
1. Use fdisk -l (or parted -l) for see what name have you WD's HDD.
* For me - its /dev/sdb. Replace it to your hdd name!
2. Run parted utility:
parted /dev/sdb
3. Type "print" for see what partitions exist on disk
4. Remove all: Type "remove 1" (where 1 - number of partition)
5. Crete new table:
mklabel gpt
mkpart primary 528M 2576M
mkpart primary 2576M 4624M
mkpart primary 16M 528M
mkpart primary 4828M 100%
mkpart primary 4624M 4724M
mkpart primary 4724M 4824M
mkpart primary 4824M 4826M
mkpart primary 4826M 4828M
set 1 raid on
set 2 raid on
6. Ok, type "quit"
7. Format data partition:
mkfs -t ext4 /dev/sdb4
mkswap /dev/sdb3
8. Stop automatically loaded md raid (If need) and create new, normal (You can get errors "Not found". Its normal):
mdadm --stop /dev/md*
mdadm -A /dev/md0 /dev/sdb1 /dev/sdb2 （新盘这2个命令都会报错，不用管，直接过）
mdadm --create /dev/md0 --level=1 --metadata=0.9 --raid-devices=2 /dev/sdb1 /dev/sdb2
# Type "watch cat /proc/mdstat" and wait 100%. Then - [ctrl] + [c] for close.
9. Use data partition as download folder:
mount -t ext4 /dev/sdb4 /mnt
cd /mnt
10. Download one of arhive's to /mnt folder:
v3.04.01-230: https://fox-exe.ru/WDMyCloud/WDMyCloud-Gen1/Backups/original_v03.04.01-230.tar.gz
v4.01.02-417: https://fox-exe.ru/WDMyCloud/WDMyCloud-Gen1/Backups/original_v04.01.02-417.tar.gz
11. Extract by console:
tar xvfz original_v3.04.01-230.tar.gz（这里有点小问题，应该是：original_v03.04.01-230.tar.gz）
12. Ok. Upload backup images to WD's hdd:
dd if=kernel.img of=/dev/sdb5
dd if=kernel.img of=/dev/sdb6
dd if=config.img of=/dev/sdb7
dd if=config.img of=/dev/sdb8
dd if=rootfs.img of=/dev/md0
13. Tell device to Fresh install (Fix for "0 MB usage" in webgui)
mkdir /mnt/hdd
mount /dev/md0 /mnt/hdd
touch /mnt/hdd/etc/.fresh_install
umount /mnt/hdd
14. Shutdown PC. (Or use "Logout" in menu)
shutdown -p -H 0
15. Connect HDD to WD's plate and turn on WDMyCloud. Wait ~5-10 min.
刷机重启后，指示灯会变红，用IP登录进去，提示：内容状态：未安装。
解决办法如下：
1、开启SSH，使用parted -l，如果提示如下，需要Fix，那就输入Fix，这是修复磁盘分区。修复后建议重启。
2、如果重启后还是红灯，那就去 系统还原设置，选“快速”，不要选“仅系统”。
重启后一般就好了。
当然，还有论坛的老办法，镜像法。
|
|
淘帖
rimary header thinks Alt. header is not at the end of the disk.