916+ 918+ loader引导驱动扩展（搜索不到的福音，增加几十款驱动

本帖最后由 124718842 于 2018-7-12 16:49 编辑

众所周知，JUN的1.02b,1.03a2 loader引导对网卡支持非常有限，这是因为他直接用原汁原味的DSM驱动。国外有个叫做G-88的大神制作了jun引导的扩展包，所有系列都有。针对于磁盘控制器，以及网卡驱动跟处理器驱动进行增强。看他的帖子有说如果是针对磁盘控制器进行增强，那么会多少映像一点传输性能，不过问题不大。现在我将他的扩展包添加到jun的引导里，简单的说jun原本的驱动才1M，现在加上这个扩展达到5M多，可见增加了多少东西进去.造福一下那些能启动却搜索不到等等，来吧，小白鼠们上吧！至少你们还有一线希望，如果再支持不了那么你们真得死心吧
我已经把扩展包集成到引导里面了，重新制作你们的引导然后该改什么改什么的试试看吧。再提醒一句，pid，vid必须要改，主板如果有c1也要关闭。一下是支持的网卡驱动列表，控制器，处理器

链接: https://pan.baidu.com/s/1ZSIKMPTSvU4IC4u6x8l0Pw 密码: c9bt

下面是支持列表

DS918+ original Hardware
Celeron J3455, 4 cores, 1.5GHz base, 2.3 GHz burst, HD Graphics 500, Apollo Lake, Q3/2016
(USB 3.0, M.2 NVMe, 4GB RAM DDR3L 1866 CL13 1.35V, SATA Marvell 88SESE9215, Network Chip ???)

tested to boot, normal DSM usage without transcode:
Core i5-4570, 4 cores, 3.2 GHz base, 3.6 GHz burst, Intel HD Graphics 4600, Haswell, Q2/2013
Core i5-4670T, 4 cores, 2.3 GHz base, 3.3 GHz burst, Intel HD Graphics 4600, Haswell, Q2/2013
Xeon E3-1220v3, 4 cores, 3.1 GHz base, 3.5 GHz burst, no graphics, Haswell, Q2/2013
Xeon E3-1270v3, 4 cores, 3.5 GHz base, 3.9 GHz burst, no graphics, Haswell, Q2/2013
Atom C2550, 4 cores, 2.4 GHz base, 2.6 GHz burst, no graphics, Avoton, Q3/2013
Core i7-4790, 4 cores, 3.6 GHz base, 4.0 GHz burst, HD Graphics 4600, Haswell, Q2/2014
Celeron N3150, 4 cores, 1.6 GHz base, 2.1 GHz burst, HD Graphics Celeron N3000 Series, Braswell, Q1/2015
Core i3-6100, 2 cores, 3.7 GHz base, 3.70 GHz burst, HD Graphics 530, Skylake, Q3/2015
Core i5-6500, 4 cores, 3.2 GHz base, 3.60 GHz burst, HD Graphics 530, Skylake, Q3/2015
Xeon E3-1225v5, 4 cores, 3.7 GHz base, 3.70 GHz burst, HD Graphics P530, Skylake, Q4/2015
Celeron J3160, 4 cores, 1.6 GHz base, 2.2 GHz burst, HD Graphics 400, Braswell, Q1/2016
Celeron J3455, 4 cores, 1.5GHz base, 2.3 GHz burst, HD Graphics 500, Apollo Lake, Q3/2016
Pentium J4205, 4 cores, 1.5 GHz base, 2.6 GHz burst, HD Graphics 505, Apollo Lake, Q3/2016
Pentium G4560, 2 cores, 3.5 GHz base, 3.5 GHz burst, HD Graphics 610, Kaby Lake, Q1/2017
Pentium G4600, 2 cores, 3.6 GHz base, 3.6 GHz burst, HD Graphics 630, Kaby Lake, Q1/2017
Core i7-7700, 4 cores, 3.6 GHz base, 4.2 GHz burst, HD Graphics 630, Kaby Lake, Q1/2017
Core i7-7700T, 4 cores, 2.9 GHz base, 3.8 GHz burst, HD Graphics 630, Kaby Lake, Q1/2017
Xeon E3-1230v6, 4 cores, 3.5 GHz base, 3.9 GHz burst, no graphics, Kaby Lake, Q1/2017
Celeron J4105, 4 cores, 1.5 GHz base, 2.5 GHz burst, HD Graphics 600, Gemini Lake, Q4/2017
Pentium Silver J5005, 4 cores, 1.5 GHz base, 2.8 GHz burst, HD Graphics 605, Gemini Lake, Q4/2017
Core i3-8100, 4 cores, 3.6 GHz base, 3.6 GHz burst, HD Graphics 630, Coffee Lake, Q4/2017
Core i7-8700, 6 cores, 3.1 GHz base, 4.6 GHz burst, HD Graphics 630, Coffee Lake, Q4/2017
Core i7-8700K, 6 cores, 3.7 GHz base, 4.7 GHz burst, HD Graphics 630, Coffee Lake, Q4/2017
Pentium Gold G5500, 2 cores, 3.8 GHz base, 3.8 GHz burst, HD Graphics 630, Coffee Lake, Q2/2018
AMD Ryzen 7 2700X (only tested with Win10 and 918+ VM in VirtualBox)

tested to boot and video hardware transcode with DSM intergrated features:
section removed because of to many different views what it is and how to test it resulting in wrong or unsafe information, can be further discussed in the developer thread for dsm 6.2, if we find a easy test that works without a valid serial number that can be used be everyone it can be added again, i dont want people to make buying decisions based on unreliable information

not working:
(Core i3-4130, HD Graphics 4400, Haswell, Q3/2013 -> Haswell also as working (4th gen intel core))
AMD Phenom
Core i5-2500k
Core i7-2600, Sandy Bridge, Q1/2011
Xeon E3-1220L, Sandy Bridge, Q2/2011
Core i7-3770, Ivy Bridge, Q2/2012
Celeron G1610T (HP Microserver G8), Ivy Bridge, Q1/2013
Core i3-3220T, Ivy Bridge, Q3/2012
Core i3-3220, Ivy Bridge, Q3/2012
Pentium G2030, Ivy Bridge, Q3/2013

provided by 918+ image (inside rd.gz)
(only important nic/storage driver listed)

e1000e.ko (replaced by new from extra.lzma)
igb.ko
r8168.ko

provided by jun's extra.lzma and taken into my extra.lzma
(might be replaced if needed with newer versions from external source)

alx.ko
atl1.ko
atl1c.ko
atl1e.ko
ax88179_178a.ko
bnx2.ko
BusLogic.ko
button.ko
cnic.ko
e1000.ko
jme.ko
libphy.ko
mdio.ko
megaraid_mbox.ko
megaraid_mm.ko
megaraid_sas.ko
megaraid.ko
mii.ko
mptbase.ko
mptctl.ko
mptsas.ko
mptscsih.ko
mptspi.ko
netxen_nic.ko
ohci-hcd.ko
pcnet32.ko
qla3xxx.ko
qlcnic.ko
qlge.ko
r8168.ko (tested)
r8169.ko
scsi_transport_spi.ko
sfc.ko
skge.ko
sky2.ko
tg3.ko
uio.ko
usbnet.ko
vmw_pvscsi.ko
vmxnet3.ko

newly compiled drivers:
(if no version remark then it's from kernel 4.4.59, newer versions when newer hardware was used that was not supported in kernel version)

3w-9xxx.ko
3w-sas.ko
aacraid.ko
arcmsr.ko
asix.ko
atl2.ko
atlantic.ko
be2net.ko
bna.ko
bnx2x.ko (tested)
cx82310_eth.ko
cxgb.ko
cxgb3.ko
cxgb4.ko
dl2k.ko
e100.ko
e1000e.ko (tested, v3.4.0.2 from external source)
enic.ko
evdev.ko
forcedeth.ko
gdth.ko
hp100.ko
hpsa.ko
hptiop.ko
i40e.ko
isci.ko
ixgbe.ko (v5.3.7 from external source)
libsas.ko
mcs7830.ko
mlx4_core.ko
mlx4_en.ko
mlx5_core.ko
mpt2sas.ko (tested, v20.00.04.00)
mpt3sas.ko (v23.00.00.00)
mvmdio.ko
mvsas.ko
mvumi.ko
pegasus.ko
plusb.ko
raid_class.ko
rtl8150.ko
sc92031.ko
scsi_transport_sas.ko
sis190.ko
sis900.ko
tn40xx.ko (v0.3.6.16.1 from external source)
via-rhine.ko
via-velocity.ko