之前用unraid  后面一直折腾不好， 就换系统了， 现在是windows ， 用vwmare  ， 我用的固件是ts- 264c的，求大神帮忙看看 model 如何写呢lspci  信息如下

1. 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
   
2. 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
   
3. 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
   
4. 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
   
5. 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
   
6. 00:07.7 System peripheral: VMware Virtual Machine Communication Interface (rev 10)
   
7. 00:0f.0 VGA compatible controller: VMware SVGA II Adapter
   
8. 02:00.0 USB controller: VMware USB1.1 UHCI Controller
   
9. 02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
   
10. 02:02.0 Multimedia audio controller: Ensoniq ES1371/ES1373 / Creative Labs CT2518 (rev 02)
    
11. 02:03.0 USB controller: VMware USB2 EHCI Controller
    

复制代码

lspci -vtnn 信息如下

1. -[0000:00]-+-00.0  Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190]
   
2.            +-01.0-[01]--
   
3.            +-07.0  Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110]
   
4.            +-07.1  Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111]
   
5.            +-07.3  Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
   
6.            +-07.7  VMware Virtual Machine Communication Interface [15ad:0740]
   
7.            +-0f.0  VMware SVGA II Adapter [15ad:0405]
   
8.            +-11.0-[02]--+-00.0  VMware USB1.1 UHCI Controller [15ad:0774]
   
9.            |            +-01.0  Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) [8086:100f]
   
10.            |            +-02.0  Ensoniq ES1371/ES1373 / Creative Labs CT2518 [1274:1371]
    
11.            |            \-03.0  VMware USB2 EHCI Controller [15ad:0770]
    

复制代码

我的model 如下

1. [System Enclosure]
   
2. VENDOR = QNAP
   
3. MODEL = TS-264C
   
4. CAP=0x12141b9c
   
5. MAX_DISK_NUM = 6
   
6. 
   
7. 
   
8. [System Disk 1]
   
9. DEV_BUS = B00:D07:F1
   
10. DEV_PORT = 1  
    
11. [System Disk 2]
    
12. DEV_BUS = B00:D07:F1
    
13. DEV_PORT = 2
    
14. 
    
15. [System Network 1]
    
16. DEV BUS=B02:D01:F0  
    
17. DEV PORT=0
    
18. 
    
19. 
    
20. [Usb Enclosure]
    
21. VENDOR = QNAP
    
22. MODEL = USB
    
23. MAX_PORT_NUM = 7
    
24. USB3_PORT_BITMAP = 0xFE
    
25. EXT_PORT_NUM = 2
    
26. 
    
27. [Usb Port 1]
    
28. DEV_BUS = B02:D00:F0
    
29. DEV_PORT = 1
    
30. [Usb Port 2]
    
31. DEV_BUS = B02:D00:F0
    
32. DEV_PORT = 2
    
33. 
    
34. 
    
35. [Boot Enclosure]
    
36. VENDOR = QNAP
    
37. MODEL = BOOT
    
38. MAX_DISK_NUM = 1
    
39. 
    
40. [Boot Disk 1]
    
41. DISK_DRV_TYPE = ATA  
    
42. DEV_BUS =B00:D07:F1
    
43. DEV_PORT = 0

复制代码

我的vm 配置如下

ide 0 0 系统盘 130g
ide  0 1 资料盘 120g
删除dvd之后 重启虚拟机 ， 显示这些信息 ， 好像还是没成功
134.429232] multipathd restart
134.5285761
====== 2023-06-22 22:58:13 TS-264C (5.18.2348-20230325) boot fin
ished

IDE只做引导盘
sata另外重新整

[System Disk 1]
DEV_BUS = B0017:F0
DEV_PORT = 0
DEV_BRIDGE_BUS = BXXXX:FX  （虚拟机里这个子BUS需要写上去）
DISK_FORM_TYPE = PD_FORM_M_2_SATA
SLOT_NAME = M.2 SSD 1

[Boot Enclosure]
VENDOR = QNAP
MODEL = BOOT
MAX_DISK_NUM = 1
DISK_DRV_TYPE = ATA
[Boot Disk 1]
DEV_BUS = B0007:F1
DEV_PORT = 0


最后你需要加载虚拟网卡驱动