ymjkk 发表于 2014-5-23 14:03 OK。多谢。我会努力再研究的。 |
本帖最后由 ymjkk 于 2014-5-23 14:07 编辑 amwihgu 发表于 2014-5-22 21:35 你这命令还是用的2.5的python所以不成功，你可以参考我另外专门写的帖子，或者直接执行python2.7 /goagent/local/proxy.py,不过这样不是后台运行，命令行会一直有输出，具体后台实现，我帖子有，就在置顶，另外一个安装python2.7的方法。 http://www.nasyun.com/thread-22938-1-1.html |
ymjkk 发表于 2014-5-19 09:39 您好。 目前用您给的博客的方法，安装Python2.7成功，但是在Putty中输入运行Python运行的是2.5，得输入Python2.7才运行这个版本，这是否正常？ 以及，我将goagent放在<root>根目录中，然后试着运行它，结果如下： Bryan-Server:~# python /goagent/local/proxy.py File "/goagent/local/proxy.py", line 253 OpenSSL.crypto.X509Extension(b'basicConstraints', True, b'CA:TRUE'), ^ SyntaxError: invalid syntax 不知是否给能点帮助？ 谢谢。 |
amwihgu 发表于 2014-5-21 08:50 是的，这个重装会完全保留。 |
ymjkk 发表于 2014-5-19 09:39 感谢。 是的，我用你提供的博客安装Python成功了。后续的步骤还有待有空再尝试。至少成功了一半。 顺带请教一下：长按Reset键的恢复，数据是会完全保留的是吗？ |
amwihgu 发表于 2014-5-17 22:40 你可以用我分享的另外一个办法来安装，我用APT安装的有很多问题，后来卸载还把MBL给搞崩溃了，幸好预先留了一手可以通过reset恢复系统，恢复以后我用另外那个方法来安装就一点问题也没有了。 |
ymjkk 发表于 2014-5-16 20:05 Bryan-Server:~# sudo apt-get install python2.7 Reading package lists... Done Building dependency tree Reading state information... Done You might want to run `apt-get -f install' to correct these: The following packages have unmet dependencies: libc6-ppc64: Depends: libc6 (= 2.18-6) but 2.11.2-2 is to be installed locales: Depends: glibc-2.18-1 python2.7: Depends: python2.7-minimal (= 2.7.6-8) but it is not going to be in stalled Depends: libpython2.7-stdlib (= 2.7.6-8) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a s olution). Bryan-Server:~# sudo apt-get install libpython2.7-stdlib Reading package lists... Done Building dependency tree Reading state information... Done You might want to run `apt-get -f install' to correct these: The following packages have unmet dependencies: libc6-ppc64: Depends: libc6 (= 2.18-6) but 2.11.2-2 is to be installed libpython2.7-stdlib: Depends: libpython2.7-minimal (= 2.7.6-8) but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.2-2 is to be installed Depends: libdb5.3 but it is not going to be installed Depends: libexpat1 (>= 2.1~beta3) but 2.0.1-4+lenny3 is to be installed Depends: libffi6 (>= 3.0.4) but it is not going to be installed Depends: libssl1.0.0 (>= 1.0.0) but it is not going to be installed Depends: libtinfo5 but it is not going to be installed locales: Depends: glibc-2.18-1 E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Bryan-Server:~# sudo apt-get install libpython2.7-minimal Reading package lists... Done Building dependency tree Reading state information... Done You might want to run `apt-get -f install' to correct these: The following packages have unmet dependencies: libc6-ppc64: Depends: libc6 (= 2.18-6) but 2.11.2-2 is to be installed locales: Depends: glibc-2.18-1 E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). Bryan-Server:~# sudo apt-get install libc6 Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: glibc-doc The following packages will be upgraded: libc6 1 upgraded, 0 newly installed, 0 to remove and 306 not upgraded. 2 not fully installed or removed. Need to get 0B/4510kB of archives. After this operation, 750kB disk space will be freed. WARNING: The following packages cannot be authenticated! libc6 Install these packages without verification [y/N]? Y Preconfiguring packages ... dpkg: error processing /var/cache/apt/archives/libc6_2.18-6_powerpc.deb (--unpack): parse error, in file '/var/lib/dpkg/tmp.ci/control' near line 9 package 'libc6': `Conflicts' field, invalid package name `libc6:hppa': character `:' not allowed (only letters, digits and characters `-+._') Errors were encountered while processing: /var/cache/apt/archives/libc6_2.18-6_powerpc.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Bryan-Server:~# 现在的问题是这样的，我作为门外汉着实无从下手了。 您分离的博客里我看到有其它的Approach，我正在尝试，谢谢。 |
ymjkk 发表于 2014-5-16 20:05 您好，感谢。 APT缓存不够的问题我昨天其实通过Google解决了。 但是，后来遇到一个奇怪的“安装档案的子步骤中遇到命名不符合规范的文件”，然后Python的Depend的东西都没装上，无法继续。 |
amwihgu 发表于 2014-5-16 18:27 这个是APT的缓存不够，这个问题我遇到了，是通过注释掉其他源解决的，但是通过APT装问题很多，我建议另外一种方式： http://www.liy.name/?p=1380 参照这个教程装，装好的python在/OPT/BIN目录里面，你可以用下面这个代码来替换自带的2.5
这是另外一个gaogent的教程，我是参照这个教程最后实现的后台服务。 http://www.liy.name/?p=794 这样就可以了，另外我启动代理的时候会报错，会报地址已经存在，但是不影响使用。 |
组图打开中，请稍候......