• 那是云首页
  • 快捷导航
  • 更多
    设为首页收藏本站
  • |
花生壳

mycloud gen1主板启动信息,能否内存升级到512M?

My Cloud NAS  / 求助大神  / 正序浏览   © 著作权归作者本人所有

#楼主# 2017-3-13 12:42

跳转到指定楼层
  1. barebox 2011.06.0 (May 17 2013 - 15:47:30)





  2. Board: Mindspeed C2000


  3. c2k_spi_probe


  4. cfi_probe: cfi_flash base: 0xc0000000 size: 0x04000000


  5. ## Unknown FLASH on Bank at 0xc0000000 - Size = 0x00000000 = 0 MB


  6. Using ENV from SPI Flash.


  7. a=============================================================================r


  8. |:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|


  9. |:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|


  10. |:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|


  11. |:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|


  12. |:::::::::::WWWWWWWWW::::WWWWWWW::::::::WWWWWWW::DDDDDDDDDDDDDDDDD::::::::::::|


  13. |:::::::::::WWWWWWWW::::WWWWWWWW:::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDD::::::::::|


  14. |:::::::::::WWWWWWWW:::WWWWWWWWW::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDDDD:::::::::|


  15. |::::::::::::::::::::::::::::::::::::::::::::::::::::::::::DDDDDDDDDDD::::::::|


  16. |:::::::::::WWWWWWW:::WWWWWWWWWW::::WWWWWWW::DDDDDDDDD:::::::DDDDDDDDD::::::::|


  17. |:::::::::::WWWWWWW::WWWWWWWWWWW:::WWWWWWW::DDDDDDDDD::::::::DDDDDDDDD::::::::|


  18. |:::::::::::WWWWWW::WWWWWW::WWWWW:WWWWWWW::DDDDDDDDDD:::::::DDDDDDDDDD::::::::|


  19. |:::::::::::WWWWWWWWWWWWW:::WWWWWWWWWWWW::DDDDDDDDDD::::::DDDDDDDDDDD:::::::::|


  20. |:::::::::::WWWWWWWWWWWW::::WWWWWWWWWWW::DDDDDDDDDDD:::DDDDDDDDDDDDD::::::::::|


  21. |:::::::::::WWWWWWWWWWW:::::WWWWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDDDD::::::::::::|


  22. |:::::::::::WWWWWWWWWW::::::WWWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDDD::::::::::::::|


  23. |:::::::::::WWWWWWWWW:::::::WWWWWWWW::DDDDDDDDDDDDDDDDDDDDDDDD::::::::::::::::|


  24. |:::::::::::WWWWWWWW::::::::WWWWWWW::DDDDDDDDDDDDDDDDDDDD:::::::::::::::::::::|


  25. |:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|


  26. |:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|


  27. |:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|


  28. |:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::|


  29. y=============================================================================a





  30. 1 0





  31. Copying Barebox from SPI Flash


  32. BB Copying Done


  33. ## Starting Barebox at 0x01000000 ...








  34. barebox 2011.06.0-svn5554-dirty3 (May 17 2013 - 15:47:01)





  35. Board: Mindspeed C2000


  36. c2k_spi_probe


  37. c2k_otp_probe.


  38. cbus_baseaddr: 9c000000, ddr_baseaddr: 03800000, ddr_phys_baseaddr: 03800000


  39. class init complete


  40. tmu init complete


  41. bmu1 init: done


  42. bmu2 init: done


  43. util init complete


  44. GPI1 init complete


  45. GPI2 init complete


  46. HGPI init complete


  47. HIF rx desc: base_va: 03e80000, base_pa: 03e80000


  48. HIF tx desc: base_va: 03e80400, base_pa: 03e80400


  49. HIF init complete


  50. bmu1 enabled


  51. bmu2 enabled


  52. pfe_hw_init: done


  53. pfe_firmware_init


  54. pfe_load_elf


  55. pfe_load_elf no of sections: 10


  56. pfe_firmware_init: class firmware loaded


  57. pfe_load_elf


  58. pfe_load_elf no of sections: 10


  59. pfe_firmware_init: tmu firmware loaded


  60. pfe_load_elf


  61. pfe_load_elf no of sections: 14


  62. pfe_firmware_init: util firmware loaded


  63. miidev_restart_aneg for PHY4


  64. miidev_restart_aneg for PHY0


  65. Using ENV from SPI Flash.


  66. nand_probe: comcerto_nand base: 0xc8300000 size: 0x2048 MB


  67. NAND type unknown: 00,00


  68. No NAND device found!!!


  69. Malloc space: 0x00b00000 -> 0x01000000 (size  5 MB)


  70. Stack space : 0x00af8000 -> 0x00b00000 (size 32 kB)


  71. running /env/bin/init...


  72. [INFO]  Waiting for WD Magic Packet (5 sec): CTRL+C to skip...




  73. Hit any key to stop autoboot:  3 2 1


  74. init_sata:


  75. serdes: 24Mhz ref clk


  76. Serdes 1 : CMU OK


  77. Serdes 1 : Lane OK


  78. Serdes 2 : CMU OK


  79. Serdes 2 : Lane OK


  80. cap 0x6f26ff81  port_map 0x3  n_ports 2


  81. P#SERR 0x0


  82. IS 0x0


  83. Port 0 control: 0x300


  84. Port 0 status: 0x0


  85. P#SERR 0x0


  86. IS 0x0


  87. Port 1 control: 0x300


  88. Port 1 status: 0x0


  89. GHC 0x80000000


  90. GHC 0x80000002


  91. ahci_init_one: SUCCESS





  92. SATA Controller Info:



  93. AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode


  94. flags: ncq stag pm led clo only pmp pio slum part


  95. No port device detected!


  96. timeout exit!


  97. sataenv: GPT header not found


  98. timeout exit!


  99. sataenv: partition 7 not an environment


  100. timeout exit!


  101. sataenv: GPT header not found


  102. timeout exit!


  103. sataenv: partition 8 not an environment


  104. timeout exit!


  105. GPT header not found


  106. Bad Magic Number


  107. booting kernel of type uimage from

  108. Usage: bootm [-n] image


  109. Boot an application image.


  110. -n        Do not verify the image (speeds up boot process)

复制代码


那是云论坛 - 国内知名的NAS交流平台
http://www.nasyun.com
分享淘帖
回复 印象

使用道具

0

精华

100

回帖

2403

积分

搞机大神

Rank: 3Rank: 3

云币
1
贡献
350
活跃
596
精华
0
kunc 发表于 2017-3-13 12:43 来自 中国湖北襄阳
cpu
  1. cpuinfo

  2. implementer: ARM


  3. architecture: Unknown


  4. I-cache: 512 bytes (linelen = 64)


  5. D-cache: 8192 bytes (linelen = 8)


  6. Control register: A W P D L I   U XP


  7. locals:


  8. PATH=/env/bin


  9. uloaderimage=microloader-c2kevm.bin


  10. bareboximage=barebox-c2kevm.bin


  11. autoboot_timeout=3


  12. ip=none


  13. kernel_loc=sata


  14. kernelimage_type=uimage


  15. kernelimage=uImage


  16. rootfs_loc=sata


  17. rootfs_type=ext4


  18. rootfsimage=root.ext4-128k


  19. usb3_internal_clk=yes


  20. bootargs=console=ttyS0,115200n8, init=/sbin/init mac_addr=00:11:22:33:44:55,00:1A:1B:1C:1D:1E,00:2A:2B:2C:2D:2E


  21. rxicmp_startup_env=/env/bin/rxicmp_startup_script


  22. board_test=0


  23. model=sq


  24. globals:


  25. Barebox-C2K >/

  26. Barebox-C2K >/ pwd

  27. /


  28. Barebox-C2K >/ rxicmp

  29. [INFO]  Waiting for WD Magic Packet (5 sec): CTRL+C to skip...


  30. Barebox-C2K >/  socinfo

  31. -----------------------------





  32. barebox 2011.06.0-svn5554-dirty3 (May 17 2013 - 15:47:01)


  33. PLL0: 1300, PLL1: 800, PLL2: 500, PLL3: 1066 MHz


  34. ARM Clock: 650 MHz


  35. AXI Clock: 200 MHz


  36. DDR Clock: 533 MHz


  37. IPSEC Clock: 250 MHz


  38. C2K Revision: A1
复制代码


回复 支持 反对 印象

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关于作者

kunc

搞机大神

  • 主题

    14

  • 帖子

    114

  • 关注者

    18

etsme
快速回复 返回列表 搜索 官方QQ群
懒人地图| 手机版|小黑屋| 智能生活 , 上那是云 |闽ICP备2020018196号-1 |网站地图