更新了TOS4.0.02之后，迅雷不及掩耳安装了docker，绑定迅雷！高兴之余发现ssh工具连接不上了ssh-secure file transfer，但是查看端口还是开放的，用另外一款ssh工具却只可以，putty可以连接上，连接之后ifconfig命令查看，发现多了一个docker的连接

Using username "root".
Using keyboard-interactive authentication.
Password:
Welcome to Tnas!
[root@TNAS-0074C9 ~]# ls
[root@TNAS-0074C9 ~]# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 0.0.0.0
        inet6 fe80::42:faff:fe2c:ed1a  prefixlen 64  scopeid 0x20<link>
        ether 02:42:fa:2c:ed:1a  txqueuelen 0  (Ethernet)
        RX packets 199201  bytes 11146316 (10.6 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 85712  bytes 8049356 (7.6 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.3.4  netmask 255.255.255.0  broadcast 192.168.3.255
        inet6 fe80::6ebf:b5ff:fe00:74c9  prefixlen 64  scopeid 0x20<link>
        ether 6c:bf:b5:00:74:c9  txqueuelen 1000  (Ethernet)
        RX packets 3566233  bytes 4921170232 (4.5 GiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2568994  bytes 360979697 (344.2 MiB)
        TX errors 1  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 11958  bytes 9197254 (8.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 11958  bytes 9197254 (8.7 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


知道的回复下，慢慢查怎么解决！

好像是4.0.02的网络设备有变化，不关docker的事情