请问卡在这里是怎么回事，要如何解决？

请问卡在这里了，该怎么办呢？

[System Enclosure] VENDOR = QNAP MODEL = TS-453B CAP=0x161cdb9c  MAX_DISK_NUM = 4   MAX_NET_PORT_NUM = 10 INTERNAL_NET_PORT_NUM = 1 MAX_PCIE_SLOT = 2  BOARD_SN_DEVICE = NET ETH_MAC_DEVICE = NET DISK_DRV_TYPE = ATA DISK_DEFAULT_MAX_LINK_SPEED = PD_SATA_SAS_6G SYSTEM_DISK_CACHEABLE_BITMAP = 0x1E SS_MAX_CHANNELS = 40 SS_FREE_CHANNELS = 4  [System Disk 1] DEV_BUS = B0007:F0 DEV_PORT = 1 [System Disk 2] DEV_BUS = B0007:F0 DEV_PORT = 1 [System Disk 3] DEV_BUS = B0007:F0 DEV_PORT = 1 [System Disk 4] DEV_BUS = B0007:F0 DEV_PORT = 1  [System Network 1] DEV_BUS = B0018:F0 DEV_PORT = 0   [Boot Enclosure] VENDOR = QNAP MODEL = BOOT MAX_DISK_NUM = 1 DISK_DRV_TYPE = ATA   [Boot Disk 1] DEV_BUS = B0007:F0 DEV_PORT = 0  [System Memory] MAX_CHANNEL_NUM = 2 MAX_SLOT_NUM = 2 SLOT1_ADDR = 1, 0x50 SLOT2_ADDR = 2, 0x52

vpe虚拟机安装，出了这个问题，求助呀

model.conf错了，lspci -vtnn贴出来，让大家看看啊