请问，到最后一步，选择“y”就行了吗？
WDMyCloud:~# e2fsck -b 32768/dev/sda4
Usage: e2fsck [-panyrcdfvtDFV] [-b superblock] [-B blocksize]
                [-I inode_buffer_blocks] [-P process_inode_size]
                [-l|-L bad_blocks_file] [-C fd] [-j external_journal]
                [-E extended-options] device

Emergency help:
-p                   Automatic repair (no questions)
-n                   Make no changes to the filesystem
-y                   Assume "yes" to all questions
-c                   Check for bad blocks and add them to the badblock list
-f                   Force checking even if filesystem is marked clean
-v                   Be verbose
-b superblock        Use alternative superblock
-B blocksize         Force blocksize when looking for superblock
-j external_journal  Set location of the external journal
-l bad_blocks_file   Add to badblocks list
-L bad_blocks_file   Set badblocks list
WDMyCloud:~# y
-bash: y: command not found

michael_wang9 发表于 2014-11-11 20:46
请问，到最后一步，选择“y”就行了吗？
WDMyCloud:~# e2fsck -b 32768/dev/sda4
Usage: e2fsck [-panyrc ...

是的 我是一起选y

michael_wang9 发表于 2014-11-11 20:46
请问，到最后一步，选择“y”就行了吗？
WDMyCloud:~# e2fsck -b 32768/dev/sda4
Usage: e2fsck [-panyrc ...

e2fsck     -b     32768     /dev/sda4

注意空格啊   

not_a_mail 发表于 2014-11-14 00:11
是的 我是一起选y

WDMyCloud:~# parted -l
Model: ATA WDC WD30EFRX-68E (scsi)
Disk /dev/sda: 3001GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name     Flags
3      15.7MB  528MB   513MB   linux-swap(v1)  primary
1      528MB   2576MB  2048MB  ext3            primary  raid
2      2576MB  4624MB  2048MB  ext3            primary  raid
5      4624MB  4724MB  99.6MB                  primary
6      4724MB  4824MB  101MB                   primary
7      4824MB  4826MB  1049kB                  primary
8      4826MB  4828MB  2097kB                  primary
4      4828MB  3001GB  2996GB  ext4            primary


Model: Linux Software RAID Array (md)
Disk /dev/md0: 2048MB
Sector size (logical/physical): 512B/4096B
Partition Table: loop

Number  Start  End     Size    File system  Flags
1      0.00B  2048MB  2048MB  ext3


WDMyCloud:~# mke2fs -n /dev/sda4
mke2fs 1.42.5 (29-Jul-2012)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
182853632 inodes, 731387904 blocks
36569395 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
22321 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
        102400000, 214990848, 512000000, 550731776, 644972544

WDMyCloud:~# e2fsck -b 32768 /dev/sda4
e2fsck 1.42.5 (29-Jul-2012)
/dev/sda4 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes

nmgzhj 发表于 2014-11-20 19:54
WDMyCloud:~# parted -l
Model: ATA WDC WD30EFRX-68E (scsi)
Disk /dev/sda: 3001GB

这是哪里出问题了，