- Disk /dev/sda: 7641 MB, 8012390400 bytes, 15649200 sectors
- 974 cylinders, 255 heads, 63 sectors/track
- Units: cylinders of 16065 * 512 = 8225280 bytes
- Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id T ype
- /dev/sda1 0,32,33 4,52,48 2048 67583 65536 32.0M 83 L inux
- Partition 1 does not end on cylinder boundary
- /dev/sda2 4,52,49 45,0,19 67584 722943 655360 320M 83 L inux
- Partition 2 does not end on cylinder boundary
- /dev/sda3 45,0,20 85,202,53 722944 1378303 655360 320M 83 L inux
- Partition 3 does not end on cylinder boundary
- /dev/sda4 85,202,54 115,224,45 1378304 1861631 483328 236M 5 E xtended
- Partition 4 does not end on cylinder boundary
- /dev/sda5 85,235,23 87,245,30 1380352 1413119 32768 16.0M 83 L inux
- /dev/sda6 88,22,63 90,33,7 1415168 1447935 32768 16.0M 83 L inux
- /dev/sda7 90,65,40 92,75,47 1449984 1482751 32768 16.0M 83 L inux
- /dev/sda8 92,108,17 115,224,45 1484800 1861631 376832 184M 83 L inux
- Disk /dev/sdb: 56 GB, 60022480896 bytes, 117231408 sectors
- 7297 cylinders, 255 heads, 63 sectors/track
- Units: cylinders of 16065 * 512 = 8225280 bytes
- Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id T ype
- tc@box:~$ ./create_qnap_boot
- Try to mount /dev/sda2 failed.
复制代码
手动卸载都没有用 启动盘放在Msata ssd
第一次启动时正常的 运行create_qnap_boot 都正常 修改补丁后 再次运行 一直报fail 大致忘了啥错误 反正刚开始能下到15% GET XXXXXX
然后我重启重新操作就报上面错误了 重新写启动盘都没用!!
稍后试试拔插内存看看 |