支持一下...........

厉害的楼主，学习一下了，多谢多谢

先顶后下载，感谢大神的分享！！

刚好我的也是IT8686E，可以借鉴一下了

太牛了，不知所云……

[   51.657141] it87: it87 driver version v1.0-52-g2b8b4fe
[   51.662896] it87: Found IT8689E chip at 0xa40, revision 1,Patched by R-mt for QNAP
[   51.663031] it87: Beeping is supported
[   51.672921] GPIO Simple IO Base Address = 0xa00
[   51.677863] ACPI Warning: SystemIO range 0x0000000000000A45-0x0000000000000A46 conflicts with OpRegion 0x0000000000000A45-0x0000000000000A46 (\GSA1.SIO1) (20200925/utaddress-213)
[   51.694972] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

是不是需要填acpi_enforce_resources=lax，这个命令需要编译到bzImage里嘛？还是grub里面填下就行

smc326 发表于 2022-8-9 13:20
[   51.657141] it87: it87 driver version v1.0-52-g2b8b4fe
[   51.662896] it87: Found IT8689E chip a ...

填在grub就行了，问题接踵而至。所有参数都跑/sys/class/hwmon/hwmon1/device里面了

学习学习大佬的成果  谢谢

非常感谢大佬！！！！

来来看看行不行来来看看行不行